How To Clean The Home All Kinds Of Lamps And Lanterns Correctly?
- May 10, 2018 -

What harm does the lamps and lanterns have long time not clean?

1. Influence aesthetics

This is the most basic hazard, and gold is afraid of dust.

2. Safety hazards

Long-term non-cleaning, due to the aging of metal parts, there are certain safety hazards.

3. Visual impairment

In the long run, the lighting will be dim, and often in dim light, people will be mentally ill.

According to the survey, the brightness of the light will be reduced by 30% in one year without cleaning up the dust.

4. Short life

Long time not clean lamps and lanterns, can make lamps and lanterns surface of dust, in heat dissipation and luminescence effect will be greatly reduced, make lamp life is reduced.

The cleaning skill of all kinds of lamps and lanterns.

First of all, the principle that lamps and lanterns is washed is able to do not dismantle, as far as possible!

Because maybe after you clean it, you will get a few more parts.

1. Ceiling lamp & chandelier.

Absorb dome lamp and droplight all hang on high, disassemble is not convenient, and lamp shade, light bulb is easy to break again, usable light cotton socks or double layer bath towel turns over to cover in hand, gently wipe.

If the lamp is very dirty, can pour a bit of kitchen to use dishwashing essence on cotton socks, finish again with clean old cotton socks to wipe once can.

The lamp that cleans height should two people cooperate, pay attention to safety.

2. Floor lamp.

The dirt on the base of floor lamp, usable soft cloth dip to wash the lamp shade with the detergent, can pour special detergent first on the cloth, then wipe the part of the cloth.

3, desk lamp

Remove the dust from the base surface and then wipe the liquid with a special detergent for the metal products containing the abrasive.

4, shoot the light,

The lamp that compares high, need to clean the base, the tool that needs to use handy when lifting head is wiped, turn the light cotton socks or double layer washcloth towel to cover in the hand, can very convenient wipe.

Pay attention to the power cut, use dry cloth as far as possible, such as water, detergent and other liquid cleaning, as far as possible to wring the cloth to dry, after cleaning the lamps and lanterns should be careful not to leave a liquid.

The cleaning skill of all kinds of lampshade.

Many families will choose to put lampshade on the lamps and lanterns, the moistureproof and dustproof, 2 come beautiful and generous.

Different lamp shade also has corresponding cleaning method.

Plastic, metal lampshade cleaning:

(1) add a versatile cleaner with a wring cloth to wipe the dirt.

(2) wipe off the remaining detergent ingredients with a wring cloth.

(3) finally, use dry clean dishcloth and clean it carefully again.

Acrylic lampshade cleaning:

(1) gently brush the dust off with soft cloth like flannel.

After (2), use dry clean dishcloth, once again carefully wipe clean.

Cloth and paper lampshade cleaning:

(1) first of all, avoid electrostatic duster to remove dust.

After (2), wipe the dirt with dry dishcloth.

(3) small parts of handicrafts, using small items such as brushes, to remove dirt that is not easily removed.

When meeting this kind of easy to produce electrostatic lamp shade, here has a small skill: the edible vinegar that is about a beer bottle cap is poured into half basin water to mix, the cloth is soaked in it, wring after dry clean lamps and lanterns.

So, the lamps and lanterns that wipe out is not only bright, still do not have static electricity, do not touch dirt easily.

Cleaning tips for switches, sockets and lampshades:

Leave hand mark on the light switch, with eraser, can be clean as new.

If dirt is contaminated in the socket, remove the power supply first and then use a soft cloth to clean it with a little detergent.

When clean with corrugated cloth lampshade, use a kind of soft toothbrush to make a tool, not easy to damage lampshade.

Clean the lampshade made of propylene, can wipe the detergent, then wash the detergent with water, then wipe dry.

Ordinary light bulb can be wiped with salt water.

LED use rules and maintenance methods.

Prevention is the best remedial method, know some basic lamps and lanterns use common sense, the late maintenance and life time of lamps and lanterns will be saved a lot of heart.

1. After buying the lamp, do not be busy installing, should read the installation instructions carefully, follow the installation instructions according to the lamps and lanterns, otherwise there may be danger.

2. Do not change the structure of the lamps and lanterns during cleaning and maintenance, and do not change the parts of the lamps at will. After maintenance, the lamps should be installed as is, and the components of the lamps and lanterns should not be missed.

3, avoid frequent switch when use the lamps and lanterns, although the number of leds switch resistance is common fluorescent lamp of about 18 times, but still too frequently will influence electronic components inside the LED lamp life, thus affecting the service life of lamps and lanterns.

4. In particular, in addition to special LED lamps, ordinary LED lamps should be avoided in humid environment.

The humidity environment can affect the electronic components of LED lamp drive power supply, the electronic components are damped, and the lamp life is shortened.

Therefore, moisture is the key to lighting maintenance, especially the bathroom, the leds of the bathroom and the kitchen stove headlights, all want to install the dampproof lampshades, in order to prevent moisture intrusion, avoid corrosion damage or leakage short circuit.

5. Finally, the LED lamp should not be washed with water. Just wipe it with dry cleaning cloth. If you do not touch the water carefully, try to dry it. Do not wipe it with a damp cloth immediately after turning on the light.

Matters needing attention

1. Ordinary LED lights cannot be used in the circuit of dimming lamp, delay switch and induction switch.

2. Avoid using in high-temperature and high-humidity environment.

3. The interior of LED lamps is mainly power driven, and it is recommended that non-professionals do not assemble and assemble themselves, so as to avoid the risk of electric shock.

4, LED lighting lamps and lanterns is in commonly the environment temperature is 5 ~ 40 ℃ under the condition of use.

5. The metal part of the LED lighting lamp should not be used with the polishing powder and other chemicals at will.

6. The dust behind LED lighting fixtures should be cleaned with dry cloth or duster.

7. Avoid frequent switches to avoid additional burden on lamps.

Many people's family in daily lamps and lanterns use process often neglects to maintain this link, many people's lamps and lanterns use method is to buy - install - use - damage - discard.

But as long as pay attention to the daily routine cleaning and ensure the normal use method, we got a lot of lamps and lanterns can actually "alive", in other words, you may have saved a lot of "light".