The Combination Of Voltage Regulator Diode And LED
- Aug 04, 2018 -

The combination of voltage regulator diode and LED

    LED (Light Emitting Diode) has high photoelectric conversion performance. Its basic structure is an electroluminescent semiconductor crystal placed on a leaded shelf and then sealed with epoxy resin to protect the internal core. use. If a current passes, the crystal will illuminate, and different semiconductor crystals will emit light of different colors. The principle is that in some PN junctions of semiconductor materials, the injected minority carriers recombine with the majority carriers to release excess energy in the form of light, thereby directly converting electrical energy into light energy. The PN junction adds a reverse voltage, and minority carriers are difficult to inject, so they do not emit light.led bulb light

    And what is a Zener diode?

    When a current breakdown occurs in the diode, the diode is not damaged as long as the breakdown current has not reached the current required for the avalanche breakdown, and the diode reverse voltage is fixed at a specific value. When the voltage applied to the ends of the diode disappears, the diode will automatically recover and will not be damaged. This breakdown is called Zener breakdown. People use the characteristics of the diode Zener breakdown to make a voltage regulator diode.led tube light

    Such a diode is a semiconductor device that has a very high resistance until a critical reverse breakdown voltage. At this critical breakdown point, the reverse resistance is reduced to a small value. In this low resistance region, the current increases and the voltage remains constant. The regulated diode is binned according to the breakdown voltage, because this The characteristic is that the Zener diode is mainly used as a voltage regulator or a voltage reference component. Its volt-ampere characteristics, the voltage regulator diodes can be connected in series for use at a higher voltage, and more stable voltage can be obtained by series connection.led flame bulb

    The Zener diode is different from the 锗 diode: if the reverse voltage is sometimes referred to as "bias", when the reverse voltage is increased to a certain value, the current is made for a small bias change. Produces a considerable increase. The voltage that causes this effect is called the "breakdown" voltage or the "Zener" voltage. For example, the breakdown voltage of the 2DW7 tube is between 5.8 and 6.5V, and the maximum current is 30mA.led flood light

    main application:

    1, surge protection

    2, overvoltage protection in the TV

    3, arc suppression

    4, series regulator

    The voltage regulator diode can be applied to the LED light-emitting diode. For example, when manufacturing a high-power LED, we can connect a voltage regulator diode in parallel with ESD, or connect a voltage regulator diode in series, which can help the voltage regulator. Avoid LED components being destroyed by current.led ceiling light

Dalian Xinghai Technology Co., Ltd.